PLEASE NOTE: Araldite 2040 in 200mL cartridges have been discontinued by the Manufacturer as of July 1, 2024. Once our stock in these 200mL cartridges has been depleted, we will no longer be able to offer this size. The 50mL cartridges are NOT impacted by this discontinuation. However the 50ml cartridges do have a Minimum Order Quantity of 1,440 units.
Product Description
Araldite® 2040 polyurethane adhesive is a general-purpose, two-part system for bonding a wide variety of substrates. The cured material is very flexible. Araldite® 2040 polyurethane adhesive is well suited for bonding polycarbonate and polyamides as well as primed metals.
Please Note: These cartridges are designed to work best with a 50ml Dispensing dispenser. We advise you use the correct Dispenser to maximize efficiency and minimize waste. If you do not have one, please check out our Dispensers; all are excellent products and have our seal of approval.
If you prefer not to use a Dispenser, there is an option for a manual hand plunger or a caulking dispenser adapter that you can use for fast small jobs.
Features
- Ideal for bonding plastics
- Low shrinkage
- Good flexibility
- Ideal for thick bondlines
- Gap filling properties
Pretreatment
The strength and durability of a bonded joint are dependent on proper treatment of the surfaces to be bonded. At the very least, joint surfaces should be cleaned with a good degreasing agent such as acetone, isopropanol (for plastics) or other proprietary degreasing agents in order to remove all traces of oil, grease and dirt. Low-grade alcohol, gasoline, or paint thinners should never be used. The strongest and most durable joints are obtained by either mechanically abrading or chemically etching (“pickling”) the degreased surfaces. Abrading should be followed by a second degreasing treatment.
Additional information is available by consulting the Technical Data Sheet (TDS). Just ask for it!
Related products
